China's first three-stage reverse osmosis water treatment equipment
More pure water, higher dialysis quality, more comfortable patient experience
Model: Three-stage reverse osmosis: AN-ROIII
Secondary reverse osmosis: AN-ROII/1 type, AN-ROII2 type, AN-ROII/3 type
Original technology
*Three-stage reverse osmosis technology
The first-stage reverse osmosis pure water is subjected to uninterrupted repeated cycle filtration treatment by the second-stage reverse osmosis water to achieve unlimited purification and purification of the reverse osmosis water, and then supplied to the dialysis treatment after the third quarter of reverse osmosis treatment. The actual filtration frequency of reverse osmosis pure water output is greater than the commonly understood three-stage reverse osmosis membrane filtration frequency. Finally realized the output of ultrapure water.
*High concentration water recovery rate
In the three-stage reverse osmosis system, the recovery rate of the first-stage concentrated water is greater than 85%, and the concentrated water produced by the second and third stages is 100% recovered, enters the balancer and dilutes the raw water, so that the concentration of the raw water is reduced, which is beneficial to further Improve the system's reverse osmosis water quality and extend the service life of the membrane.
*High membrane surface cleaning ability
There are various levels of concentrated water recovery, and higher water flow is used to wash the membrane surface at all levels in the system, which will not cause waste of water resources.
Features and advantages
High degree of automation: with automatic operating system, automatic start, automatic protection, automatic cleaning, automatic disinfection and logging functions.
With automatic timing cycle cleaning function in standby mode, effectively prevent the growth of bacteria.
It has complete on-line conductivity, hardness (selection), residual chlorine (selection), water quality monitoring, water shortage, pressure, voltage and other safety monitoring and protection and alarm functions.
The automatic frequency conversion control system (selection) can automatically control the amount of water produced according to the actual water consumption of the user, which is more suitable for clinical applications (such as: emergency single hemodialysis operation, saving electricity and water).
Intelligent control, remote online monitoring (model selection), automatic recording of operating data, convenient management.
It has the functions of chemical disinfection and thermal disinfection (optional), disinfection protection function, real-time online monitoring of the disinfection operation status, and verification of the completeness of the disinfection operation. During the disinfection process, if there is a water cut or a power failure, the machine will automatically continue the disinfection process after the power is turned on to ensure the integrity of the disinfection and prevent the residual disinfectant from causing harm to the treatment.
